The RV Cabinet Drawer Slide Socket Set - C-Shape - 2-3/8" Deep # 37270735 don't have a weight rating as they are meant to be used for standard cabinet drawer applications - so nothing heavy duty.
Usually when someone is asking about a weight capacity it's because they are needing to carry something fairly heavy. If this is you then you might consider installing something like the MORryde RV Generator Slide Out Tray part # MR49RR for a 22-3/4" x 16-1/4" tray or part # MR69RR for a 15-3/4"... view full answer...
The Camco # CAM43503 adjusts from 9 to 13 inches wide, and is 11 inches long, so it should just fit in your kitchen cabinet drawers. view full answer...
The Camco RV Cutlery Tray # CAM43508 has overall dimensions of 7 x 12-inches (and it is 1-1/2-inches tall) so it will fit just fine in your older trailer's kitchen drawers. The tray has 4 separate spaces for your various cutlery items. You can get a good look at it in the linked review video. view full answer...
I went out to the warehouse and pulled the Propane RV Range with Glass Cover # FR97KR and drew up some dimensions for you. The handle on the door sits 2" out from the door and the door is 21-1/2" wide.
The # FR97KR has two rack positions available for use. They're really close so so you would really only have enough room for the single tray to sit inside the oven.
Typically there will be a "floor" under the ovens built in by the manufacturer. Some times there isn't though and they just... view full answer...
The overall width of the MORryde RV Cargo Sliding Tray - 72" x 20" - 2 Way Slide - 80 Percent Extension - 500 lbs part # MR74FR is 19.74" which is measured from the outside of each rail on either side. The tray width is only 16.85".
I have attached a photo below for clarification. view full answer...